wall plug
英 [ˈwɔːl plʌɡ]
美 [ˈwɔːl plʌɡ]
墙上插座
英英释义
noun
- receptacle providing a place in a wiring system where current can be taken to run electrical devices
双语例句
- Wall shear stress method integrates the plug flow displacing, the low speed displacing and the turbulent flow displacing methods in theory.
壁面剪应力设计方法，从理论上把塞流顶替、低速顶替及紊流顶替技术统一起来。 - A wall plug or screw anchor is a type of fixing used in building.
壁塞是一种装修工具，用来安装在墙上，以安放螺丝。 - Calculation of wall thickness of thick wall tube drawn without plug by using zhou-zhou formula
用双周数表计算空拔厚壁管的壁厚 - Improvement of non-uniform longitudinal wall thickness in tube-rolling on a φ 140mm plug mill
减小φ140mm自动轧管机组轧管的纵向壁厚不均 - Linear deformation zone of generating wall can be obtained by means of non-linear cone angle plug combined with the barrel-shaped rolls, so the wall accuracy can be increased greatly.
采用带有非线性顶头锥角的顶头与桶形辊相配合可以获得线性的成壁变形区，从而大大提高壁厚精度。 - Elements should have their heating sections in the furnace chamber so that no portion of the heating section extends into the furnace wall or refractory plug.
安装时应确保其发热部在炉腔内，没有超出炉壁或者难熔插栓的部分。 - Once the resulting burr generated components will run into sharp components and holes in the wall or between the bottom of defects, will plug the workpiece.
由此生成的毛刺一旦碰到锋利的部件就会在部件和孔的侧壁或底部之间产生缺陷，会堵塞工件。 - Analysis on Tube Wall Thickness Accuracy Improvement Resulting from Modified Second-Piercing Mill of Φ 400mm Plug Pipe Plant
Φ400mm机组二次穿孔机改造后钢管壁厚精度分析 - The experiment shows the wall shear stress and the Sherwood number follows an analogous law. Their minimum appears at the nose of gas plug, while their maximum appears at the bottom of gas plug.
实验结果说明，壁面剪应力与Sherwood数的变化规律类似，在弹状泡顶部达到最小。 - The results show: at lower pressure ratio, heat transfer condition on the plug surface is the worst, peak values of pressure and temperature appear along the wall of plug nozzle, temperature and temperature gradient along the section of wall reach the highest.
计算结果表明塞式喷管发动机在较低压比的工况下工作时，塞锥受热状况较为恶劣，塞锥壁面出现压强和温度的峰值，该截面内部的温度和温度梯度达到最大。